Home Cycling Gobik Envy 2.0 Jacket – Protection for cool conditions

Gobik Envy 2.0 Jacket – Protection for cool conditions

by

Gobik is a relatively new brand, founded in 2010 in southeastern Spain. They don’t have quite the same kind of exposure in the UK as more familiar clothing brands like Castelli or Assos, but with sponsorship deals to supply WorldTour teams Ineos Grenadiers and Movistar, it is likely to be increasingly visible.

The Gobik clothing range is pretty comprehensive, with summer and winter options available for men and women. The Envy 2.0 jersey/jacket is from the ‘Cold Unity’ collection, and is intended for riding in cooler weather (which, as far as the local riders in Spain seem to be concerned, is anything less than about 25° from what I have witnessed!). In truth though, the Envy 2.0 is rated by Gobik for use in temperatures of between 5° and 15°.

Man wearing a green long sleeved jersey, pale grey tights and a beige helmet riding towards the camera on a country lane

The Envy 2.0 is ideal for cool weather rides

(Image credit: Andy Jones)

Although the Envy could just about be carried in a jersey pocket as a spare layer, this is not really what it is about. It is designed to be worn for the duration of your ride, with enough water and wind protection to negate the need for any additional layers in all but the worst weather. In short, it is Gobik’s answer to Castelli’s venerable Gabba Jersey.

PFAS-free windproof and waterproof membrane paired with soft outer and inner fabrics. Apparently, the membrane uses ‘molecular diffusion’ rather than micropores for breathability, with the advantage of this technology being that the material can’t get clogged up with rain, dirt or sweat. However, it is important to note that although Gobik says that the material is waterproof, only the shoulder seams are taped, so there are still plenty of potential ingress points for heavy rain.

Close up of the left shoulder of a man wearing a green cycling jersey, showing the external seam tape on the shoulder

Only the shoulder seam is taped

(Image credit: Andy Jones)

Although the vast majority of the Envy is made using Power Shield Pro, there is a small area under each armpit made without the membrane for a bit of extra breathability.

The front features a YKK Vision Aquaguard unit, which provides important front protection against wind and rain. Beneath the rear pockets is a long neoprene panel with a silicone gripper to ward off rear wheel road spray. The collar is nice and deep with slight sculpting around the nape of the neck.

rear view of a man wearing a green jersey showing the three rear pockets and long rear flap

Three standard style pockets and a long, protective bum flap, but no security pocket

(Image credit: Andy Jones)

As you’d expect, there are three rear pockets, but unfortunately, no zipped security pocket, which is a real shame. Mesh sections at the bottom of the pockets allow water to drain out if you are unlucky enough to get caught out in torrential conditions. There are a couple of reflective details, but nothing that would make me feel like leaving my lights at home on a dull winter day.

Source link

You may also like

Leave a Comment